Front
Part Number: 111-413-401/A
Bolt to mount the top of the front shock absorber to the beam on beetles and splitscreen busses up to 1962.
£8.00Each(incVAT)
Spin UpSpin Down
Part Number: 111-413-403/A
Oversize bolt to mount the top of the front shock absorber to the beam on 1963 to 1965 beetles. Also used to mount the top of the rear shock absorber on splitscreen busses from 1955 to 1967.
£7.00Each(incVAT)
Spin UpSpin Down
Top mount, shock absorber, front - Type 1, 66>79
Part Number: 131-498-441
Top mount for the front shock absorber on beetles from 1966 to 1979.
£18.00Each(incVAT)
Spin UpSpin Down
Shock absorber, front - Type 1, 52>65
Part Number: 111-413-031/G
Wolfsburg West manufactured front shock absorber for beetles from 1952 to 1965. Perfectly replicates the original VW shock absorber in colour and ride quality.
£34.50Each(incVAT)
Spin UpSpin Down
Rear
Shock absorber, rear - Type 1, 68>79
Part Number: 113-513-031/N
Rear shock absorber for 1968 to 1979 Beetles.Made in black to the original VW specification for an authentic ride experience.
£25.00Each(incVAT)
Click here to enquireabout this product
Aftermarket shock absorbers
Part Number: 111-413-031/KYB
KYB Excel-G shock absorber for standard height vehicles or vehicles using drop spindles.
Length = 335mm collapsed & 440mm extended
Suitable for:
Beetle, front - 1966 to 1979
Karmann Ghia, front - 1965 to 1974
Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).
Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£62.50Each(incVAT)
Click here to enquireabout this product
Part Number: 111-413-031/LOW
KYB Excel-G shock absorber for lowered vehicles.
Length = 215mm collapsed & 330mm extended
Suitable for:
Beetle, front - 1966 to 1979
Karmann Ghia, front - 1965 to 1974
Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).
Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£49.50Each(incVAT)
Spin UpSpin Down
Shock absorber, lowered - Various aircooled
Part Number: 111-513-031/LOW
KYB Excel-G shock absorber for lowered vehicles.
Length = 245mm collapsed & 385mm extended
Suitable for:
Beetle & Karmann Ghia, front - up to 1965
Beetle & Karmann Ghia, rear - up to 1979
Splitscreen bus, front and rear - 1955 to 1967
Bay window bus, front and rear - 1968 to 1979
Type 3, front and rear - all years
Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).
Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£51.00Each(incVAT)
Spin UpSpin Down
Shock absorber, KYB - Various aircooled
Part Number: 111-513-031/AFT
KYB Excel-G shock absorber for standard height vehicles or vehicles using drop spindles.
Length = 265mm collapsed & 420mm extended
Suitable for:
Beetle & Karmann Ghia, front - up to 1965
Beetle & Karmann Ghia, rear - up to 1979
Splitscreen bus, front and rear - 1955 to 1967
Bay window bus, front - 1968 to 1979
Type 3, front and rear - 1962 to 1973
Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).
Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£45.00Each(incVAT)
Click here to enquireabout this product
Shock absorber, heavy duty - Various aircooled
Part Number: 111-513-031/HD
Heavy duty KYB Excel-G shock absorber for standard height vehicles or vehicles using drop spindles. These are well suited to splitscreen and bay window busses or the rear of smaller vehicles needing stiffer suspension.
Length = 265mm collapsed & 410mm extended
Suitable for:
Beetle & Karmann Ghia, front - up to 1965
Beetle & Karmann Ghia, rear - up to 1979
Splitscreen bus, front and rear - 1955 to 1967
Bay window bus, front and rear - 1968 to 1979
Type 3, front and rear - 1962 to 1973
Before ordering, please ensure that you have measured the size of the shock absorbers that you require. To find out the correct shock absorber for you, simply follow the below steps:
1.Remove your existing shock absorbers on both sides.
2.Lower the vehicle back on to its wheels and ensure the vehicle has settled.
3.Measure the distance between the centre of the two shock absorber mounting points.
4.Choose a shock absorber that your measurement is at least midway between the collapsed and extended measurement, there must be at least 2 inches of up and down movement from the normal ride height. (It is recommended that you allow 70% of downward movement and 30% of upward movement).
Please note: shock absorbers should always be replaced in pairs. Before fitting we also recommend collapsing and extending the shock absorber a few times in the correct position to remove bubbles that may have formed while in storage.
£62.50Each(incVAT)
Spin UpSpin Down
